Stone Sealer

Features + Benefits Advanced penetrating microbond protection Heavy duty protection against all stains Makes cleaning stone easier Preserves natural look Water-based low-solids coating
Interior & exterior
Where to Use
Natural stone such as marble, granite, limestone, slate, terrazzo, travertine & sandstone.

Directions
Make sure surface is clean, dry and free of waxes and coatings. Surface temperature
should be between 50°F and 80°F. Liberally apply an even coat using a paint pad,
roller or brush. Allow sealer to penetrate the surface for 15-30 minutes. During this
time, distribute excess over entire area to ensure even penetration. Remove excess
sealer by wiping entire surface thoroughly with clean, dry towels.
A second coat may be needed for porous, absorbent surfaces and should be applied 30-
40 minutes after initial application.